Breaking Down Assessment Validation: Steps to Validate Assessments

Breaking Down Assessment Validation: Steps to Validate Assessments

Blog Article

Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.

To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

We are required by the standards to carry out two types of validation.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

The Two Types of Assessment Validation Explained

The Essence of Assessment Validation

As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or verification, also known as assessment tool validation, relates to the first part of the clause, ensuring all unit requirements are met and workbooks are 100% compliant.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this write-up, we will focus on assessment tool validation.

Procedure for Assessment Tool Validation

After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.

When to Conduct Assessment Tool Validation

The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

This implies that any time you get new learning resources, assessment tool validation must be done before they are used by students.

You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- you update your resources
- your scope includes new training products
- course gets reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.

Identifying Training Products for Validation

Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.

Key Resources for Assessment Tool Validation

Academic Resources

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Validation Group

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and industry skills pertinent to the unit being validated

Recent knowledge and expertise in vocational teaching and learning

Either one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.

Principles of Assessment Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?

Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?

Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Fundamental Rules of Evidence

Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous read more tools still struggle to meet these requirements.

To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:

Walk the Talk

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappy changing

prepare bottle, bottle feed babies and clean equipment

solid food prep and feeding infants

respond to infant signs and cues appropriately

settle infants for sleep and prepare them

monitor and encourage age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

All or Nothing

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What type of information can be included in a work package?

Answers may include:

Obligatory resources

Relevant costs

Duration of activities

Assigned roles and responsibilities

If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.

This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, engineering controls, administration

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.